Features
Top & Bottom Guiding:
Provides adequate support against side loads

High allowable pressure drops:
These valves incorporate simplest form of balanced construction and provide high pressure drop capability with standard actuators.

High capacity with low pressure recovery:
Flow capacity is at top levels for contemporary double ported valves and is attained with very little pressure recovery as indicated by the high Cf factors, especially for V-Port plug design.

Invertible bodies & plugs:
The same direct spring diaphragm actuator can provide both air-to-close & air-to-open actions.

Special Options:
For moderate applications bubble tight leak tightness of Class VI is achieved, using adjustable, soft seated plugs.

Available Sizes & Rating :
¾” to 12”: ANSI 150# to ANSI 1500#,
14” & 16”: ANSI 150# to ANSI 600#
Seat Leakage Class (as per ANSI/FCI 70.2)
Standard: Class II Optional : Class VI